DataDuct Couplers

DataDuct Couplers Dataduct couplers are used to join lengths and fittings together. They consists of two wire couplers that hook over the DataDuct wires and are joined in together using an M6 roofing nut and bolt. Also it is suggested to use an earth braid to maintain earth continuity.

Datadeck and Datatray Couplers

Datadeck and Datatray Couplers Datadeck and Datatray Couplers Datadeck and Datatray linage plates are used to join lengths and fittings together. They fit by the inner bracket clamping the vertical side wires to the outer L shaped bracket which in turn supports the horizontal wires. It consists of two wire couplers that hook over the DataDuct wires and are joined in together using an M06 roofing nut and bolt. It is suggested to also use an earth braid to maintain earth continuity.

Hold Down Clamps for Dataduct and Datadeck

Hold Down Clamps for Dataduct and Datadeck The hold down clamps are used to securely fix the Datadeck and Dataduct basket to the Channel. The wire hook fixes over the horizontal wire and is fixed to the channel using an M06 roofing bolt and channel nut (not supplied)

Earth Braids

Earth Braids All metallic pathways systems should be suitably earthed and bonded. Earth braids are recommended for this purpose, these are screwed to the basket coupling system to ensure earth continuity.

Jeztape.

Jezmat is joined by the application of a 50mm width, Blue, waterproof tape which allows a simple and fast connection.