|
Datatray Basket -
Factory Made Fittings
|
90 Deg Bend
An equal bend fabricated in all product ranges. The angle gusset enables ease of cable installation.
|
90 DEG BENDS
|
Riser
Curved fittings allow the smooth routing of cables from vertical to horizontal.
|
|
Tee
The tee is gives maximum protection to cables by the angle gusset on each corner
|
Tee
|
Bridge
The bridge is used to avoid other runs or permanent obstructions on site.
|
|
Crossover
An equal or unequal junction fabricated with gusseted corners.
|
|
Reducer
The standard reducer allows reduction on one side only. Specify whether left or right hand and reduction required.
|
|
Special
Custom made fittings can be produced to suit most site requirements.
|
|
Cable Accessories
In addition to the cable support systems a large range of accessories are catered for to provide suitable fixings, for conduit take off plates, commando sockets and other switch plate outlets.
|
|
|
|
Datatray Basket -
Factory Made Fittings
|
DataDuct Couplers
DataDuct Couplers
Dataduct couplers are used to join lengths and fittings together. It consists of two wire couplers that hook over the DataDuct wires and are joined in together using an M06 roofing nut and bolt. It is suggested to also use an earth braid to maintain earth continuity.
Datadeck and Datatray Couplers
Datadeck and Datatray Couplers
Datadeck and Datatray Couplers
Datadeck and Datatray linage plates are used to join lengths and fittings together. They fit by the inner bracket clamping the vertical side wires to the outer L shaped bracket which in turn supports the horizontal wires. Dataduct couplers are use to join lengths and fittings together Dataduct couplers are used to join lengths and fittings together. It consists of two wire couplers that hook over the DataDuct wires and are joined in together using an M06 roofing nut and bolt. It is suggested to also use an earth braid to maintain earth continuity.
Hold Down Clamps for Dataduct and Datadeck
Hold Down Clamps for Dataduct and Datadeck
The hold down clamps are used to securely fix the datadeck and dataduct basket to the Channel. The wire hook fixes over the horizontal wire and is fixed to the channel using an M06 roofing bolt and channel nut (not supplied)
Earth Braids
Earth Braids
All Metallic pathways systems should be suitably earthed and bonded. Earth braids are recommended for this purpose, these are mechanically screwed to the basket jointing coupling system to ensure earth continuity.
Jeztape.
Jezmat is joined by the application of a 50mm width, Blue, waterproof tape which allows the simple and fast connection. |
|
Datatray Basket -
Factory Made Fittings
|
collars
collars
Support Comms have a proprietary solution to the protection of data cables when threaded around raised floor pedestals. These, two part, height adjustable, collars secure to the base of the Pan area and prevent the cable sheaths from being exposed to the pedestal threads.
|
|
|
